![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335083.webp)
81
Z550
Operation Manual
S
E
CT
ION 3
Se
tting
Me
asu
reme
nt Ite
m
s
SECTION 3
Setting Measurement Conditions (Expert Menu)
Width
The difference between two edges can be measured.
The following conditions will be used as an example for describing the setting procedures.
1.
Select [Meas set].
A list of outputs appears.
2.
Select an output for which [Width] is set.
In this example, select [OUT1].
The selections for measurement item appear.
3.
Select [Width].
Edge level
Width
Scn 0
䂯䇭
Set
䂯
Image
Detect set
Meas set
Extra set
Meas mode
Output
Scn 0
䂯䇭
Set
䂯
OUT0:Height
OUT1:
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
Measrmnt item
Height
Step: 2 pts
Step: 3 pts
Edge position
Width
Edge center
Peak/bottom
Angle
operation.book Page 81 Monday, June 6, 2005 10:19 AM