89
Z550
Operation Manual
S
E
CT
ION 3
Se
tting
Me
asu
reme
nt Ite
m
s
SECTION 3
Setting Measurement Conditions (Expert Menu)
Cross-sectional area
The cross-sectional area of the workpiece can be measured.
Specify the bottom face. The cross-sectional area is calculated by integrating the distances
between each of the measurement points and the bottom face.
The following conditions will be used as an example for describing the setting procedures.
1.
Select [Meas set].
A list of outputs appears.
2.
Select an output for which [Area] is set.
In this example, select [OUT1].
Bottom
face 1
Bottom
face 2
Cross-sectional
area
Scn 0
䂯䇭
Set
䂯
Image
Detect set
Meas set
Extra set
Meas mode
Output
Scn 0
䂯䇭
Set
䂯
OUT0:Height
OUT1:
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
operation.book Page 89 Monday, June 6, 2005 10:19 AM