21
Z550
Operation Manual
SE
CTION 2
M
e
nu
O
p
erati
ons
SECTION 2
Basic Operations
Screen Structure
The Controller is operated by selecting functions displayed on the screen.Familiarize yourself
with each function before operating the Controller.
*Mode
Display
Description
Set
Select this to set the measurement conditions.
Run
This mode is used for performing the actual measurement. The measurement
results are output to an external device via the terminal block or the RS-233C
connection.
Tools
Select this to check the sensor installation status and save settings and images
in a PC as backup.
System
This is used to set the system conditions of the Controller. Select this mode to
set communication specifications with external devices.
Save
Select this to save data in the flash memory in the Controller. If new settings
have been made, be sure to save the data before quitting.
S+
㸠
/
㸢
:Display S+ENT:Adjust
Scn 0
䂯䇭
Run
䂯
99.60ms
Mode (See the table below)
The current operating mode is displayed.
It varies depending on the
item to be measured.
Measurement period
(Sampling time)
Key Operations
Displays special key combinations at the bottom of the screen
where available. "S" refers to the SHIFT Key. "S + ENT" indicates
that the ENT Key should be pressed while the SHIFT Key is pressed.
There are 16 scenes.
Setting different measurement
conditions for each one allows
easy switching between
different setups.
Scene Number
The cursor is moved to the
desired function by pressing
the Up, Down, Left,
and Right keys.
Cursor Keys
operation.book Page 21 Monday, June 6, 2005 10:19 AM