![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335021.webp)
19
Z550
Operation Manual
SE
CTION 2
Sta
rting Co
ntrolle
r and
Displ
ayi
ng Profi
le
SECTION 2
Basic Operations
The Image Monitor screen appears.
If the Image Monitor screen is not displayed, use
the SHIFT Key and Right key or SHIFT Key and
Left key on the console to switch between the
monitor screens.
Screen types and display methods p.25
4.
Position the workpiece.
Example:
The profile (yellow line) indicating the height of the
workpiece is displayed.
If the profile indicating the workpiece is not
displayed, the workpiece is not positioned
properly within the measurement range. Adjust
the position of the workpiece relative to the
sensor.
㪄㪄㪄㪄㪄㪄㪄㪄㪄㪄㪄
[
25
]
[
50
]
[ ]
[ ]
S+
㸠
/
㸢
:Display S+ENT:Adjust
mm
Zero's OFF
Scn 0
䂯
99.60ms
OUT 0
䂯
Run
䂯
FAR
NEAR
Sen0
LV
PEAK
LV
PEAK
Sen1
PASS
+005.188000
[
25
]
[
50
]
[ ]
[ ]
S+
㸠
/
㸢
:Display S+ENT:Adjust
mm
Zero's OFF
Scn 0
䂯
99.60ms
OUT 0
䂯
Run
䂯
FAR
NEAR
Sen0
LV
PEAK
LV
PEAK
Sen1
[
25
]
[
50
]
[ ]
[ ]
Zero's OFF
Scn 0
䂯
99.60ms
OUT 0
䂯
Run
䂯
FAR
NEAR
Sen0
LV
PEAK
LV
PEAK
Sen1
operation.book Page 19 Monday, June 6, 2005 10:19 AM