Universal Quick Install Guide
Quantum and Triton Boards
Use this guide to install Quantum boards and Triton class telephony boards,
including Triton VoIP, Triton Analog Extension, Triton Analog Trunk (LS and LS/
GS), Triton Resource, Triton T1/PRI, and Triton T1/E1 PRI, which are all different
boards with common installation procedures.
All Triton PCI Family and Quantum Boards
Note:
In systems with over 12 boards installed, use the 10-connector side of the
ribbon cable on the short end and use the 12-connector side of the ribbon
cable on the long end. Starting with the innermost connectors, connect the
boards, leaving a minimum of 3 connectors hanging off each end.
Supported Board/Software Guidelines
Board
OE
4.0A
OE
4.0i
OE
4.5
OE/ACC/
ACM/HPBX
4.6
OE/ACC/
ACM 5.0/
5.0A
OE/ACC/ACM/
HPBX 5.0A
Update 2 & 3
OE/ACC/ACM/
HPBX 5.0A
Update 4 & up
Quantum
Yes
No
Yes
Yes
Yes
Yes
Yes
Triton Analog Extension
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Triton Analog Extension B
No
No
No
No
No
No
Yes
Triton Analog Trunk-12
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Triton Analog Trunk-8
No
No
No
No
No
Yes
Yes
Triton T1/PRI
Yes
No
Yes
Yes
Yes
Yes
Yes
Triton T1/E1 PRI
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Triton VoIP-30
No
No
Yes
Yes
Yes
Yes
Yes
Triton VoIP-8
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Triton Resource
Yes
Yes
Yes
Yes
Yes
Yes
Yes
MVIP BUS Termination Switch
Board Silhouette
Power Cable
MVIP Connector
