Quick Start Guide
Laser distance sensor with dual discrete (switched) outputs and IO-Link.
This guide is designed to help you set up and install the LTF Time of Flight Laser Distance Sensor. For complete information on
programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at
to view the manual. Use of this document assumes familiarity with pertinent
industry standards and practices.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized
sensor output condition.
Features and Indicators
Power LED
Indicator
Discrete Output 1
LED Indicator
Display
Discrete Output 2
LED Indicator
Push Buttons
Figure 1. Features
Three LED indicators provide ongoing indication of the sensing status.
Power LED Indicator
Solid Green = Normal operation, power On and laser On
Flashing Green (1 Hz) = Power On and laser Off (laser enable mode)
Discrete Output LED Indicators
Solid Amber = Discrete Output is On
Off = Discrete Output is Off
Display
Figure 2. Display shown in Run Mode
The display is a 2-line, 8-character LCD. The main screen is the
Run mode screen, which shows the real-time distance
measurement.
Buttons
Use the sensor buttons Down, Up, Enter, and Escape to program the sensor and to access sensor information.
Down and Up Buttons
Press Down and Up to:
•
Access the Quick Menu from Run mode
•
Navigate the menu systems
•
Change programming settings
•
Change individual digit values in distance based settings
When navigating the menu systems, the menu items loop.
L-GAGE
®
LTF Time of Flight Laser Distance
Sensor with IO-Link
Original Document
195394 Rev. D
7 March 2019
195394
