![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335028.webp)
26
SE
CTION 2
Sc
reen
Type
s a
nd Dis
p
la
y M
e
tho
d
s
Z550
Operation Manual
SECTION 2
Basic Operations
Image Monitor
This is the main monitor screen of the Controller. The first time the power supply is turned on
after delivery, this screen is displayed.The Image Monitor screen consists of two displays, the
profile display and the line brightness display. Use the TRIG Key to switch between the displays.
Profile Display
The distribution of height measurements at 1024 points is displayed as a profile.This display
allows keeping track of the height information visually; it is possible to check how the workpiece
in the lines is detected by checking the shape.
•
At setting: It is possible to check whether the sensor is positioned within the measurement
range.
•
During measurement: It is possible to visually keep track of the detection status and the
position of the workpiece .
Profile Display
Line Brightness Display
PASS
mm
+005.188000
BRIGHT
DARK
[
15
]
[
170
]
[ ]
[ ]
TRIG Key
PASS
mm
+005.188000
[
15
]
[
170
]
[ ]
[ ]
S+
㸠
/
㸢
:Display S+ENT:Adjust
Zero's OFF
Scn 0
䂯
99.60ms
OUT 0
䂯
Run
䂯
FAR
NEAR
Sen0
LV
PEAK
LV
PEAK
Sen1
S+
㸠
/
㸢
:Display S+ENT:Adjust
Zero's OFF
Scn 0
䂯
99.60ms
OUT 0
䂯
Run
䂯
FAR
NEAR
Sen0
LV
PEAK
LV
PEAK
Sen1
Line 0
Position
Line 1023
Low
High
Height
Sensor
Line beam
Profile (yellow)
Measurement points (Red)
The measured points are displayed.
No point is displayed when the
measurement is in error.
[
15
]
[
170
]
[ ]
[ ]
Measurement
range
Measurement
center
Scn 0
䂯
99.60ms
Run
䂯
FAR
NEAR
Sen0
LV
PEAK
LV
PEAK
Sen1
operation.book Page 26 Monday, June 6, 2005 10:19 AM