86
S
E
CT
ION 3
Se
tting
Me
asu
reme
nt Ite
m
s
Z550
Operation Manual
SECTION 3
Setting Measurement Conditions (Expert Menu)
The selections for measurement item appear.
3.
Select [Peak/bottom].
The measurement line setting screen appears.
4.
Specify the start and end lines.
Left/Right key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
ENT Key: Selects the setting.
ESC Key: Cancels the setting.
The characteristic quantity setting screen appears.
5.
Select the measurement point.
Select which position (peak or bottom) within the specified
region will be measured.
The cross cursor indicating the measurement point moves
according to the selection; therefore, select the position
while monitoring the image.
In this example, select [Peak].
A confirmation message appears.
6.
Select [Execute].
The setting will be registered and the screen display returns to
2
.
Measrmnt item
Height
Step: 2 pts
Step: 3 pts
Edge position
Width
Edge center
Peak/bottom
Angle
Peak
Bottom
Peak
Bottom
Reference will be
registered. OK?
Cancel Back
Execute
operation.book Page 86 Monday, June 6, 2005 10:19 AM