![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335036.webp)
34
SE
CTION 2
Le
ar
nin
g
B
a
sic O
p
er
ation
s
(C
on
ver
sa
tion
al M
e
n
u
)
Z550
Operation Manual
SECTION 2
Basic Operations
Step
2
Selecting the Measurement Method
It is possible to measure with higher accuracy by changing the measurement range in the height
direction.
Only the measurement range in the height direction is specified here. The measurement range in the width
direction is automatically changed according to this setting. Please refer to Setup Manual for the
measurement range of each sensor.
1.
Select [Set].
The initial screen of the conversational menu appears.
2.
Select [Next].
Reference distance
Measurement
center
Measurement range
(Height)
Measurement range
(Width)
Sensor
Scn 0
䂯䇭
Run
䂯
Set
Run
Tools
System
Save
Perform settings in
the following order.
STEP 1:Measurement method
STEP 2:Measurement region
STEP 3:Sensitivty adj method
STEP 4:Edge detection method
Next
Back
operation.book Page 34 Monday, June 6, 2005 10:19 AM