159
Z550
Operation Manual
S
E
CT
IO
N 4
Te
stin
g M
eas
ur
em
ent Pe
rfor
ma
nce
(Tes
t)
SECTION 4
Other Functions
Testing Measurement Performance (Test)
Use the following procedure to execute test measurements according to the conditions set for the output
currently displayed.The test measurements are completed internally by the Controller and the
measurement results are not output via the terminal block or RS-232C.
There are two types of measurement methods.
•
Test measurements can be performed continuously for the specified number of measurements only.
•
The TRIG Key can be used to specify the start and end of the test measurement period.
Meaning of Test Results
The results of five measurements are displayed as a list; it is convenient in the following situations.
•
When evaluating the precision of measurement under partially different conditions
•
When comparing the steady state and moving state
Test results
The most recent test results are displayed in reverse video.
After the 5th measurement, the previous results
are overwritten in order starting from 1.
Measurement status
During measurement, [RUN] flashes.
Measurement results
p
The output number being tested is displayed.
Press the Up and Down keys to change the number.
OUT0 -0004.03975mm [STOP]
MAX-MIN
+0000.01821
+0000.01821
No.
1
2
3
4
5
AVE
-0004.05122
-0004.05122
NUM
100
100
Scn 0
䂯
Tools
䂯
Switch display items
OUT0 -0004.03975mm [STOP]
MIN
-0004.05770
-0004.05770
No.
1
2
3
4
5
MAX
-0004.03948
-0004.03948
NUM
100
100
Scn 0
䂯
Tools
䂯
Item
Meaning
NUM
Displays the number of measurements performed during the test measurement
period.
AVE
Displays the average measurement value for the test measurement period.
MAX-MIN
Displays the difference in the measurement values (the maximum measurement
value minus the minimum measurement value) for the test measurement period.
MAX
Displays the maximum measurement value for the test measurement period.
MIN
Displays the minimum measurement value for the test measurement period.
operation.book Page 159 Monday, June 6, 2005 10:19 AM