62
S
E
CT
ION 3
Se
tting
the
Workp
iece
Pos
ition
Detec
tion
M
ethod
Z550
Operation Manual
SECTION 3
Setting Measurement Conditions (Expert Menu)
The screen for setting the edge detection level for
compensating for shift in the position direction appears.
5.
Align the dotted line with the edges to be detected.
Up/Down key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
ENT Key: Selects the setting.
The selections appear.
6.
Select the edge search direction.
Points that can be detected at the specified edge level are
displayed as measurement point candidates.
7.
Repeat pressing the Left or Right key until the cross
cursor appears at the point to be used as the
reference position.
8.
Select the setting by pressing the ENT Key.
A confirmation message appears.
9.
Select [Execute].
Left
䇭㸢䇭
Right
Right
䇭㸢䇭
Left
Reference will be
registered.
OK?
Execute
Cancel Back
operation.book Page 62 Monday, June 6, 2005 10:19 AM