![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335077.webp)
75
Z550
Operation Manual
S
E
CT
ION 3
Se
tting
Me
asu
reme
nt Ite
m
s
SECTION 3
Setting Measurement Conditions (Expert Menu)
Step: 3 pts
Level differences, grooves, and other items of workpieces can be measured.
Specify two regions for the bottom face and one region for the top face. The difference, i.e., the
gap between the average of the bottom face measurements and the top face measurement, is
calculated.
The following conditions will be used as an example for describing the setting procedures.
1.
Select [Meas set].
A list of outputs appears.
2.
Select an output for which [Step: 3 pts] is set.
In this example, select [OUT1].
Top
face
Bottom
face
Bottom
face
Difference
Scn 0
䂯䇭
Set
䂯
Image
Detect set
Meas set
Extra set
Meas mode
Output
Scn 0
䂯䇭
Set
䂯
OUT0:Height
OUT1:
OUT2:
OUT3:
OUT4:
OUT5:
OUT6:
OUT7:
operation.book Page 75 Monday, June 6, 2005 10:19 AM