Operation Procedure and Reference Manual
The following shows main contents of operation steps and manuals. Select the manual suitable for your
purpose and read it before starting operation
INTRODUCTION
This operation manual describes the menu operations of the Controller. The Controller supports various
methods of inspection by combining measurement methods and various settings.
Please read this manual and related manuals thoroughly before using the Controller in order to operate it
properly.
POWER
POWER
Installation
Wiring
Starting the Controller and Setting Workpieces in Place
Adjusting Images
Setting Measurement Conditions and Starting Measurement
Outputting Data to External Device
Operation Manual
Explains menu operation method and communication method with external
devices.
Multi-Dimensional Sensor
Setup Manual
Multi-Dimensional Sensor
Operation Manual
Trademarks
• Windows 95/98, Windows NT/2000 are registered trademarks of the Microsoft
Corporation in the United States and other countries.
• Hyper Terminal has been developed by Hilgraeve Inc. in the United States and are
also registered trademark of the Microsoft Corporation in the United States and other
countries.
This manual provides information on
system hardware. Be sure to read this
manual first.
This manual explains menu operation method
and communication method with external
devices.
Setup Manual
Contains information on safe use of the unit, series of procedures starting from
package content check, installation to cable connection, together with functions
and specifications of the unit and its peripheral devices.