![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335020.webp)
18
SE
CTION 2
Sta
rting Co
ntrolle
r and
Displ
ayi
ng Profi
le
Z550
Operation Manual
SECTION 2
Basic Operations
Starting Controller and Displaying Profile
When the Controller is started up, the monitor displays the detection status.This is referred to as profile
(plotted height information).
No profile is displayed if the workpiece is not placed within the measurement range of the sensor.
Place the workpiece and adjust the sensor position while monitoring the displayed image.
1.
Check that the basic components have been connected correctly.
Before connecting components or wiring power supply lines and grounding wires, be sure to refer to
the relevant section in Setup Manual.
Page 15 in Setup Manual
2.
Turn the power supply to the monitor on.
3.
Turn the power supply to the Controller on.
Console
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
㬍
ESC
TRIG
SHIFT
ENT
CONSOLE
Monitor
Sensor
Power Supply
operation.book Page 18 Monday, June 6, 2005 10:19 AM