138
S
E
CT
IO
N 4
Usi
ng th
e Fo
rc
e-Ze
ro Fu
nctio
n
Z550
Operation Manual
SECTION 4
Other Functions
How to Execute the Force-Zero Function
Force-zero can be executed from the Image Monitor screen or the Trend Monitor screen.
When the force-zero function is executed, the zero value is determined using the latest
measurement value even if the hold output or logging output is specified.
This example shows how to execute the force-zero function from the console when the Image
Monitor screen is displayed. It is also possible to specify to use the force-zero function from the
terminal block or via RS-232C.
Terminal Block p.190
RS-232C p.208
Executing Force-Zero Only for the Output Displayed
1.
Position the reference workpiece.
2.
Move the cursor to [Zero's OFF] and press the ENT
Key.
A confirmation message appears.
3.
Select [Yes].
Image Monitor
Trend Monitor
Force-zero
Zero's OFF
Scn 0
䂯
Run
䂯
FAR
NEAR
Zero's OFF
Scn 0
䂯
Run
䂯
Zero's OFF
Scn 0
䂯
Run
䂯
FAR
NEAR
OUT 0
PASS
mm
+005.188000
The zero point will be
force-set.
Yes
䇭
Clear 0
䇭
All 0
operation.book Page 138 Monday, June 6, 2005 10:19 AM