![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335063.webp)
61
Z550
Operation Manual
S
E
CT
ION 3
Se
tting
the
Workp
iece
Pos
ition
Detec
tion
M
ethod
SECTION 3
Setting Measurement Conditions (Expert Menu)
1.
Select [Detect Set/Height&Pos correct/Reference].
A profile graph appears.
2.
Check that the workpiece is positioned correctly and
press the ENT Key.
The screen for setting the area in the height direction
appears.
Keep the default setting (the entire screen) if
compensation in the height direction is not
necessary.
3.
Specify the start and end lines.
Left/Right key: Moves the cursor.
(Press these keys together with the SHIFT Key to move
the cursor quickly.)
ENT Key: Selects the setting.
ESC Key: Cancels the setting.
The characteristic quantity setting screen appears.
4.
Select the characteristic quantity to be used as the
reference point.
Select which position (peak, bottom, or average) within the
specified area will be measured.
The cross cursor indicating the measurement point moves
according to the selections.
Select the position while monitoring the image.
Scn 0
䂯䇭
Set
䂯
Image
Detect set
Meas set
Extra set
Meas mode
Output
Height
䇭䇭䂯
Slant correct
Height & Pos correct
None
䇭䂯
Reference
Average
Peak
Bottom
Peak
Bottom
operation.book Page 61 Monday, June 6, 2005 10:19 AM