![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335042.webp)
40
SE
CTION 2
Le
ar
nin
g
B
a
sic O
p
er
ation
s
(C
on
ver
sa
tion
al M
e
n
u
)
Z550
Operation Manual
SECTION 2
Basic Operations
Step
6
Setting Measurement Items
The Controller can measure up to eight items simultaneously.
Eight setting frames, OUT0 to 7, are provided for each scene; assign the measurement items for each
scene.
In this example, [Step: 2 pts] is assigned to [OUT1].Specify two measurement target lines and calculate
the difference between the two measurement points, i.e., the gap between them.
[Height] is set in [OUT0] as the default setting.To set an item other than [Height] in [OUT0], delete the existing
measurement item.
p.99
Other measurement items
p.70
1.
Select [Settings].
Difference
Top face Bottom face
Settings will be registered.
Allocate measurement items
to OUT0 to OUT7
in the measurement settings.
Settings can be accessed
from the Adjustment Menu.
Execute Cancel
Settings
Scn 0
䂯 䇭
Set
䂯
operation.book Page 40 Monday, June 6, 2005 10:19 AM