![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335047.webp)
45
Z550
Operation Manual
SE
CTION 2
Sa
ving
Setti
ngs
and
Exitin
g Contro
ller O
p
er
ation
SECTION 2
Basic Operations
Saving Settings and Exiting Controller
Operation
When any settings have been changed, be sure to save the new settings in the flash memory before
turning the power supply off.
The Controller loads the data in the flash memory every time it is started; therefore, changes made are
deleted if the power is turned off before saving the changes in the flash memory.
1.
Display the screen for the Run mode.
2.
Move the cursor to [Run
] and press the ENT Key.
A list of modes appears.
3.
Select [Save].
A confirmation message appears.
4.
Select [Execute].
Do not turn the power off or input a RESET signal while a message is being displayed in any save or
load operation.Data in the memory will be destroyed, and the Controller may not operate correctly
the next time it is started.
When the saving has been completed, the screen display will return to
3
.
5.
Turn the power supply off and exit the Controller operation.
Scn 0
䂯
Run
䂯
Scn 0
䂯䇭
Run
䂯
Set
Run
Tools
System
Save
The data will be saved.
OK?
Cancel
Execute
operation.book Page 45 Monday, June 6, 2005 10:19 AM