![background image](http://html.mh-extra.com/html/omron/z550/z550_operation-manual_1633335221.webp)
219
Z550
Operation Manual
S
E
CT
IO
N 6
RS-2
32
C
SECTION 6
Communication with External Devices
SCNSAVE
Function......Saves scene data in the host device from the Controller.
SCNSAVE <Scene>
•
Specify a scene between 0 and 15.If the argument is omitted, the scene data being
displayed is saved.
•
The data transfer is performed using the XMODEM (-CRC or -SUM) protocol.
The XMODEM (-1K) protocol is not supported.
•
The Controller sends a READY signal to the host device when it has completed its
initialization, and then starts to transfer data.
Command executed correctly
: OK
Command not executed correctly
: ER
Example:
SYSLOAD
Function......Loads system data from the host device into the Controller.
SYSLOAD
•
The data transfer is performed using the XMODEM (-CRC or -SUM) protocol.The
XMODEM (-1K) protocol is not supported.
•
The Controller sends a READY signal to the host device when it has completed its
initialization. Wait for the READY signal to be received at the host device before
starting the data transfer.
Command executed correctly
: OK
Command not executed correctly
: ER
Input
Delimiter
Output
Delimiter
Delimiter
SCNSAVE 2
This example saves the data of scene 2 in the host device.
OK
Input
Delimiter
Output
Delimiter
Input
Delimiter
Output
Delimiter
Delimiter
operation.book Page 219 Monday, June 6, 2005 10:19 AM