![background image](http://html.mh-extra.com/html/omron/sysmac-ny512-1300/sysmac-ny512-1300_user-manual_742451108.webp)
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-8
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
5-4
SNMP Settings Display
SNMP Service
*1 If you specify to use the SNMP trap, you also have to set the recognition 1 and 2 as described below.
*2 The following ports are used by the system and cannot be set by the user: 25, 53, 68, 110, 2222, 2223, 2224,
9600, and 44818.
Additional Information
Refer to
Section 12 SNMP Agent
for details on the SNMP service.
Setting
Description
Default
SNMP service
Specify whether to use the SNMP monitor service.
*1
If not using the SNMP monitor service is specified, an
SNMP manager cannot connect from an external
device.
Do not use.
Port No.
*2
Set the port number to use to connect to the SMTP
server that is used to connect from an SNMP man-
ager. This setting does not normally need to be
changed.
161
Address
Set the communications device administrator name
and installation location as text information. You do not
necessarily have to input all items. This information is
read by the SNMP manager. (You can input up to 255
single-byte alphanumeric characters for each item.)
None
Location
None
Send a recognition trap
Set whether to send an authentication trap. If you
select
Send a recognition trap
and there is access
from an SNMP manager that is not set in Recognition
1 or Recognition 2, an authentication trap is sent to the
SNMP manager. If you select
Send a recognition trap
,
specify the SNMP trap settings on the SNMP Trap Tab
Page.
Do not use.
Summary of Contents for Sysmac NY512-1300
Page 459: ......