1-23
1 Introduction
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
1-5
Et
herNe
t/IP Co
mm
unic
ation
s
Pr
o
cedu
res
1
Using the FTP Client
Precautions for Correct Use
Precautions for Correct Use
To use the FTP client, you need to make the Virtual SD Memory Card settings in advance. Refer
to the
NY-series Industrial Panel PC / Industrial Box PC Software User’s Manual
(Cat. No.
W558) for information on making the Virtual SD Memory Card settings.
Using the SNMP Agent
Using BOOTP
1
Execute the FTP client communications instructions in the user pro-
gram.
↓
2
Check operation.
•
Use the Sysmac Studio to check the communications status with the end codes
of the instruction (
Done, Error,
and
ErrorID
).
1
Use the Sysmac Studio to set the initial settings of the EtherNet/IP
Function Module.
•
Set the SNMP settings.
•
Set the SNMP trap settings.
↓
2
Check operation.
•
Check the event log to see if the SNMP agent started.
1
Use the Sysmac Studio to set the initial settings of the EtherNet/IP
Function Module.
Section 5 Sysmac Studio
Settings for the Built-in Eth-
erNet/IP Port
•
Set the BOOTP settings.
↓
2
Check operation.
•
Check the event log to see if BOOTP started.
•
Check the Online system-defined variable.
Summary of Contents for Sysmac NY512-1300
Page 459: ......
