5-3
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
5-1 T
C
P/IP Setting
s Displa
y
5
DNS
*1 These settings are required when DNS is used.
Host Name - IP Address
Keep Alive
Setting
Description
Default
DNS
Enable using DNS if a DNS is used to resolve host names
when host names are specified for the remote communica-
tions nodes in CIP communications and socket instructions.
A DNS server is required to use DNS.
Do not use.
Priority DNS server
*1
Set the IP address of the DNS server. You can set priority
and secondary IP addresses.
None
Secondary DNS server
None
Domain name
*1
Sets the domain name of the domain to which the built-in
EtherNet/IP port belongs. (Single-byte alphanumeric char-
acters, dots, and hyphens: 48 characters max.)
None
Setting
Description
Default
Host Name
Addresses are converted according to this setting when
host names are used to specify remote communications
nodes.
They can be set even if DNS is not used. You can set up to
six host names. (You can use up to 200 single-byte alpha-
numeric characters, dots, and hyphens with up to 63 single-
byte alphanumeric characters between dots.)
None
IP Address
Set the IP addresses of the registered hosts.
None
Setting
Description
Default
Keep Alive
Set whether to use the remote node keep alive function of
connected servers and clients (such as socket services,
FTP server, Sysmac Studio, and TCP). If the keep-alive
function is used and the remote node does not respond
during the set keep-alive monitoring time, the connection is
disconnected. The connection is left open if the power sup-
ply to the remote node is turned OFF without warning. Use
the keep-alive function whenever possible.
•
Use.
•
Do not use.
Use.
Keep Alive Monitoring
Time
The connection is disconnected if the keep-alive function is
used and the remote node does not respond during the
monitoring time set in the
Keep Alive Monitoring
Setting
.
Setting range: 1 to 65,535 (seconds)
300
Linger option
Set whether to specify the
Linger Option
for connections to
TCP or socket services. If the
Linger Option
is specified,
the port number is immediately opened even before the
port number is released after the socket closes (approx. 1
minute).
•
Specify.
•
Do not specify.
Do not specify.
Summary of Contents for Sysmac NY512-1300
Page 459: ......