14-3
14 Checking Communications Status of Network and Troubleshooting
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
14-
1 Device
Mon
itorin
g
o
n
th
e Net
w
o
rk Con
fig
urato
r
14
14-
1-2 S
tatus Disp
lays
of the Device Monitor
ing
Information about the target node that acts as the originator is displayed. If all tag data link connec-
tions to the node are established and normal, this information is displayed in blue. However, if any
connection is broken it is displayed in red.
Data Link Status
Comparison Error
The remote node information in the tag data link parameters was
different from the actual node information.
Main causes:• The specified target does not exist.
•
The variable name does not match.
•
The connection size is different.
•
Connection resources are not sufficient.
Tag Data Link Error
There were two or more errors in a connection as an originator.
Invalid Parameter
An error was found in the validation check of the parameters for
tag data links that are saved in non-volatile memory.
All Tag Data Links
Tag data links are communicating in all connections as the origina-
tor.
Tag Data Link
Tag data links are communicating in one or more connections as
the originator.
Configuration Error
Status
Ethernet Link Status
TRUE when a link is established with the Ethernet switch.
Ethernet Basic Settings Logic
Error
TRUE when the following settings are incorrect:
•
TCP/IP settings (IP address, subnet mask, or link settings)
IP Router Table Error
TRUE when there is a mistake in the IP router table information.
Ethernet Ext Config Logical Error
Always FALSE.
BOOTP Server Error
TRUE when one of the following errors occurs when using the
BOOTP server.
•
The IP address received from the BOOTP server is incorrect.
•
A communications timeout occurred with the server.
Classification
Item
Corresponding system-defined variable
Summary of Contents for Sysmac NY512-1300
Page 459: ......
