10-7
10 FTP Server
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
1
0-3 Usi
ng t
h
e F
T
P Server
Fu
nc
tion
10
1
0-3-1
Procedure
10-3 Using the FTP Server Function
1
Make the basic settings.
Refer to
1-5 EtherNet/IP Communications Procedures
for basic operations.
2
Set up the FTP server on the Sysmac Studio. (Refer to
3
Select
Built-in EtherNet/IP Port Settings
under
Configuration - Controller Setup
on the Sys-
mac Studio. Make the following settings on the FTP Settings Display.
•
FTP server
•
Port number
•
Login name
•
Password
4
Place the Controller online and transfer the settings to the Controller.
5
Connect to the built-in EtherNet/IP port from an FTP client.
6
Input the FTP login name and password that you set in the Built-in EtherNet/IP Port Settings to
log in to the built-in EtherNet/IP port.
Note
Once logged in, the ftp commands can be used, such as cd (Change Directory), and get (Obtain
File).
7
After you are logged in, you can use the ftp commands, such as cd (Change Directory) and get
(Obtain File) for the MEMCARD1 directory in the Virtual SD Memory Card in the Controller.
8
Close the connection.
Make the following settings for the unit setup when the FTP server function is used.
* Settings are not required if the FTP server is not used.
Additional Information
Make the settings in the FTP Settings Dialog Box if the FTP server is used. Refer to
for information on the FTP Settings Dialog Box.
10-3-1 Procedure
10-3-2 List of Settings Required for the FTP Server Function
Built-in EtherNet/IP Port Settings
Tab Page on Sysmac Studio
Setting
Setting conditions
Reference
FTP
FTP server
Required
Port No.
Optional
*
Note
Required when changing the
default value of 21.
Login name
Required
*
Password
Required
*
Summary of Contents for Sysmac NY512-1300
Page 459: ......
