7 Tag Data Link Functions
7-64
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
Using the Network Configurator
You can start and stop tag data links for individual devices using the Connection Tab Page in the
Monitor Device Dialog Box. This applies only to tag data links for which the device is the originator.
Select
Monitor
from the Device Menu to access the Monitor Device Dialog Box. When using an NX-
series CPU Unit, you can individually start and stop the tag data links of the built-in EtherNet/IP
ports 1 and 2 connected to the Network Configurator.
Start Connection Button:
Starts all connections for which the device is the originator.
Stop Connection Button:
Stops all connections for which the device is the originator.
You can clear the tag data link settings (or return them to their factory settings) that are saved in the
registered EtherNet/IP device. The following procedure shows how to clear the tag data link settings.
For details on how to connect to the network from the Network Configurator, refer to
the Network Configurator to the Network
.
1
Connect the Network Configurator online.
2
Select the icon of the device from which you want to clear the device parameters. In the follow-
ing example, 2 nodes are selected: 192.168.250.1 and 192.168.250.2. To select multiple nodes,
press and hold the
Shift
Key while you select additional icons.
Starting and Stopping Tag Data Links for Individual Devices
7-2-13 Clearing the Device Parameters
Summary of Contents for Sysmac NY512-1300
Page 459: ......
