manualshive.com logo in svg

Omron Sysmac NY512-1300, User Manual

Share
Download
Omron Sysmac NY512-1300 User Manual Download Page 334

12   SNMP Agent

12-10

NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)

ipOutNoRoutes

(12) RO
The number of IP datagrams that were discarded 
because there was no transmission path. This 
counter includes datagrams that attempted to be 
sent through 

ipForwDatagrams

, but were dis-

carded because they were set with no-route. This 
value indicates the number of datagrams that 
could not be transferred because the default gate-
way was down.

Sup-

ported.

According to the 
standard.

ipReasmTimeout

(13) RO
The maximum number of seconds to wait to 
receive all IP datagrams for reassembly if a frag-
mented IP datagram is received.

Sup-

ported.

60 s

ipReasmReqds

(14) RO
The number of IP datagrams received that require 
reassembly. There is a flag in the IP header that 
indicates if the datagram is fragmented. You can 
use that flag to identify fragments.

Sup-

ported.

According to the 
standard.

ipReasmOKs

(15) RO
The number of IP datagrams received that were 
successfully reassembled.

Sup-

ported.

According to the 
standard.

ipReasmFails

(16) RO
The number of IP datagrams received that were 
not successfully reassembled.

Sup-

ported.

According to the 
standard.

ipFragOKs

(17) RO
The number of IP datagrams that were success-
fully fragmented.

Sup-

ported.

According to the 
standard.

ipFragFails

(18) RO
The number of IP datagrams that were not suc-
cessfully fragmented. (For example, because the 
Don’t Fragment flag was set for the IP datagram.)

Sup-

ported.

According to the 
standard.

ipFragCreates

(19) RO
The number of IP datagrams created as a result of 
fragmentation.

Sup-

ported.

According to the 
standard.

ipAddrTable

(20) NA
An address information table for IP addresses.

---

---

ipAddrEntry

(1) NA
Row data of address information for IP addresses.
The index is 

ipAdEntAddr

.

---

---

ipAdEntAddr

(1) RO
The IP address.

Sup-

ported.

According to the 
standard.

ipAdEntIfIndex

(2) RO
The index value of the interface that this entry 
applies to.
This is the same value as 

ifIndex

.

Sup-

ported.

According to the 
standard.

ipAdEntNet
Mask

(3) RO
The subnet mask for the IP address of this entry.

Sup-

ported.

According to the 
standard.

ipAdEntB-
castAddr

(4) RO
The value of the least significant bit of the address 
when an IP broadcast is sent. An address repre-
sented by all 1 bits is used for broadcasting as an 
Internet standard. In that case, this value is always 1.

Sup-

ported.

According to the 
standard.

Subtree name

Standard [(

identifier

) 

attribute

]

Support

Implementation 

specifications

Summary of Contents for Sysmac NY512-1300













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands