manualshive.com logo in svg

Omron Sysmac NY512-1300, User Manual

Share
Download
Omron Sysmac NY512-1300 User Manual Download Page 329

12-5

12   SNMP Agent

NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)

12-1 SNMP Ag

ent
 

12

12-
1-4 

 MIB

 S

pecificatio

ns 
 

System

 Group

Detailed Descriptions of MIB Objects

Subtree name

Standard [(

identifier

) 

attribute

]

Support

Implementation specifications

sysDescr

(1) RO
Device information (including hardware, OS, 
software names, and versions)
ASCII characters only.

Sup-

ported.

“OMRON Corporation” + CPU 
Unit model + CPU Unit version

•

CPU Unit model (example): 
NY512-1300

•

CPU Unit version (example): 
Version 1.12

sysObjectID

(2) RO
Vendor OID.
Tells where this device information was 
assigned in the private MIB.

Sup-

ported.

1.3.6.1.4.1.16838.1.1025.6

sysUpTime

(3) RO
The time elapsed since the system was started 
(unit: 1/100 s).

Sup-

ported.

According to the standard.

sysContact

(4) RW
How to contact the administrator and informa-
tion on the administrator.

Sup-

ported.

Set by the user.

sysName

(5) RW
The name for management. Sets the full 
domain name of the device.

Sup-

ported.

CPU Unit name

sysLocation

(6) RW
The physical location of the device.

Sup-

ported.

Set by the user.

sysServices

(7) RO
The value of the provided service.

Sup-

ported.

64

Summary of Contents for Sysmac NY512-1300













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands