Versions
18
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
Versions
Hardware revisions and unit versions are used to manage the hardware and software in NY-series Con-
trollers and EtherCAT slaves. The hardware revision or unit version is updated each time there is a
change in hardware or software specifications. Even when two Units or EtherCAT slaves have the
same model number, they will have functional or performance differences if they have different hard-
ware revisions or unit versions.
You can check versions on the ID information indications or with the Sysmac Studio.
The unit version is given on the ID information indication on the back side of the product.
The ID information on an NY-series NY5
2-
Controller is shown below.
You can use the Sysmac Studio to check unit versions. The procedure is different for Units and for Eth-
erCAT slaves.
Checking the Unit Version of an NY-series Controller
You can use the Production Information while the Sysmac Studio is online to check the unit version
of a Unit. You can only do this for the Controller.
1
Right-click
CPU Rack
under
Configurations and Setup
-
CPU/Expansion Racks
in the
Multiview Explorer and select
Production Information
.
The Production Information Dialog Box is displayed.
Checking Versions
Checking Unit Versions on ID Information Indications
Checking Unit Versions with the Sysmac Studio
ID information indication
Unit version
Ver.1.
Summary of Contents for Sysmac NY512-1300
Page 459: ......
