manualshive.com logo in svg

Omron Sysmac NY512-1300, User Manual

Share
Download
Omron Sysmac NY512-1300 User Manual Download Page 342

12   SNMP Agent

12-18

NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)

Ip Group: Udp

Ip Group: Snmp

Name

Standard [(

identifier

) 

attribute

]

Support

Implementation 

specifications

udpInDatagrams

(1) RO
The total number of UDP datagrams (i.e., the 
number of packets) sent to the UDP user.

Sup-

ported.

According to the stan-
dard.

udpNoPorts

(2) RO
The number of UDP datagrams that were 
received but did not start an application at the 
destination port.

Sup-

ported.

According to the stan-
dard.

udpInErrors

(3) RO
The number of UDP datagrams that were not sent 
to a higher level protocol for a reason other than 

udpNoPorts

.

Sup-

ported.

According to the stan-
dard.

udpOutDatagrams

(4) RO
The total number of sent UDP datagrams.

Sup-

ported.

According to the stan-
dard.

udpTable

(5) NA
The information table for the UDP listener.

---

According to the stan-
dard.

udpEntry

(1) NA
An entry related to a specific UDP listener. The 
indices are 

udpLocalAddress

 and 

udpLocalPort

.

---

According to the stan-
dard.

udpLocal
Address

(1) RO
The local IP address of this UDP listener. A value 
of 0.0.0.0 is used for UDP listeners that accept 
datagrams from any IP interface related to the 
node.

Sup-

ported.

According to the stan-
dard.

udpLocalPort

(2) RO
The local port number for this UDP listener.

Sup-

ported.

According to the stan-
dard.

Name

Standard [(

identi-

fier

) 

attribute

]

snmpInPkts

(1) RO
The total number of SNMP messages received.

Sup-

ported.

According to the 
standard.

snmpOutPkts

(2) RO
The total number of SNMP messages sent.

Sup-

ported.

According to the 
standard.

snmpInBadVersions

(3) RO
The total number of messages received of an 
unsupported version.

Sup-

ported.

According to the 
standard.

snmpInBadCommuni-
tyNames

(4) RO
The total number of messages received from an 
unregistered community.

Sup-

ported.

According to the 
standard.

snmpInBadCommunityU-
ses

(5) RO
The total number of messages received that spec-
ify an operation that is not allowed by that commu-
nity.

Sup-

ported.

According to the 
standard.

snmpInASNParseErrs

(6) RO
The total number of messages received that 
resulted in an ASN.1 error or BER error during 
decoding.

Sup-

ported.

According to the 
standard.

snmpInTooBigs

(8) RO
The total number of PDUs received with an error 
status of 

tooBig

.

Sup-

ported.

According to the 
standard.

Summary of Contents for Sysmac NY512-1300













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands