![background image](http://html.mh-extra.com/html/omron/sysmac-ny512-1300/sysmac-ny512-1300_user-manual_742451144.webp)
7 Tag Data Link Functions
7-28
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
18
After you register all of the required tags, click the
OK
Button at the bottom of the Edit Tags Dia-
log Box.
19
At this point, a confirmation dialog box is displayed to check whether the registered tag names
are used as the tag set names. Tags are just added in this case, so click the
No
Button. Just the
tags are registered. The tags are not registered as tag sets.
20
To register the newly added tags in a tag set, either double-click the desired tag set, or select
the tag set and click the
Edit
Button.
The Tag List on the left side of the dialog box shows the tags that are already registered, and
the Candidate Tag List on the right side of the dialog box shows the other tags that are not reg-
istered yet.
21
Select the tags that you want to add from the Candidate Tag List and click the
Button.
You can register up to eight tags in a tag set. (If you include the Controller status in the tag set,
you can register up to only seven tags, and two bytes are added to the size.)
Data is sent and received in the order it is displayed in the tag list. To change the order of a tag,
select the tag and click the Up and Down Buttons (
).
22
To confirm the changes, click the
OK
Button at the bottom of the Edit Tag Set Dialog Box.
23
Click the
OK
Button in the Edit Device Parameters Dialog Box.
Summary of Contents for Sysmac NY512-1300
Page 459: ......