13 Communications Performance and Communications Load
13-10
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
You can check the usage of capacity offline without multicast filtering against the tag data link’s allow-
able bandwidth by following the procedures in
13-2-1 Checking Bandwidth Usage for Tag Data Links
The usage of capacity without multicast filtering can be adjusted against the tag data link’s allowable
bandwidth by changing the packet interval (RPI).
If the required communications performance cannot be achieved by changing the settings, re-evaluate
the network starting with the network configuration.
1
Make the required settings in the Network Configurator’s Network Configuration Window.
2
Click the
Detail
Button in the Usage of Device Bandwidth Area at the bottom of the Network
Configuration Window.
The Usage of Device Bandwidth Dialog Box will be displayed.
The
Usage of Capacity
(without multicast filter) column will show the percentage of the allowed
tag data link bandwidth being used, and the
Mbit/s
(without multicast filter) column will show the
network bandwidth being used.
13-2-4 Changing the RPI
Summary of Contents for Sysmac NY512-1300
Page 459: ......
