7-33
7 Tag Data Link Functions
NY-series Industrial Panel PC / Industrial Box PC Built-in EtherNet/IP Port User’s Manual (W563)
7-
2 S
e
tti
ng
T
ag
Da
ta
Li
n
ks
7
7-2
-5 Con
nection Settings
3
In the Unregister Device List, click the target device that requires connection settings so its color
changes to gray, and click the
Button. The selected target device is displayed in the
Register Device List, as shown in the following diagram.
4
Target node IDs are assigned to the devices that are registered in the Register Device List.
The target node ID serves as the bit array position for the following variables in the originator
Controller: Target Node Controller Mode, Target Node Controller Error Information, Target
Node Error Information, Registered Target Node Information, and Normal Target Node Informa-
tion. By default, the target ID is automatically set to the rightmost 8 bits of the IP address. In the
example above, the target device’s IP address is 192.168.250.2, so the device number is #002.
If a target node ID is duplicated and you want to change the device number, click the
Change
Target Node ID
Button and change the target ID.
Summary of Contents for Sysmac NY512-1300
Page 459: ......
