Nations N32G45 Series, User Manual

Page: 327 / 838

327 / 838
Nations Technologies Inc.
Tel
：
+86-755-86309900
Email
：
info@nationstech.com
Address: Nations Tower, #109 Baoshen Road, Hi-tech Park North.
Nanshan District, Shenzhen, 518057, P.R.China
Bit field Name Description
15:0 CCDAT3[15:0] Capture/Compare 3 value

CC3 channel is configured as output:
CCDAT3 contains the value to be compared to the counter TIMx_CNT, signaling on the OC3
output.
If the preload feature is not selected in TIMx_CCMOD2.OC3PEN bit, the written value is
immediately transferred to the active register. Otherwise, this preloaded value is transferred to the
active register only when an update event occurs.

CC3 channel is configured as input:
CCDAT3 contains the counter value transferred by the last input capture 3 event (IC3).
When configured as input mode, register CCDAT3 and CCDDAT3 are only readable.
When configured as output mode, register CCDAT3 and CCDDAT3 are readable and writable.
11.4.18 Capture/compare register 4 (TIMx_CCDAT4)
Offset address: 0x40
Reset value: 0x0000
Bit field Name Description
15:0 CCDAT4[15:0] Capture/Compare 4 value

CC4 channel is configured as output:
CCDAT4 contains the value to be compared to the counter TIMx_CNT, signaling on the OC4
output.
If the preload feature is not selected in TIMx_CCMOD2.OC4PEN bit, the written value is
immediately transferred to the active register. Otherwise, this preloaded value is transferred to the
active register only when an update event occurs.

CC4 channel is configured as input:
CCDAT4 contains the counter value transferred by the last input capture 4 event (IC4).
When configured as input mode, register CCDAT4 and CCDDAT4 are only readable.
When configured as output mode, register CCDAT4 and CCDDAT4 are readable and writable.
11.4.19 Break and Dead-time registers (TIMx_BKDT)
Offset address: 0x44
Reset value: 0x0000
Note: AOEN, BKP, BKEN, OSSI, OSSR, and DTGN [7:0] bits can all be write protected depending on the LOCK