Mitsubishi Electric MR-J4, Instruction Manual

Page: 707 / 794

18. MR-J4-03A6 SERVO AMPLIFIER
18 - 66
(c) Parameters of 7 or more decimal digits
The following example gives the operation procedure to change the [Pr. PA06 Electronic gear
numerator (command pulse multiplication numerator)] to "12345678".
Press "MODE" to switch to the basic setting parameter screen.
The screen flickers
(Note 1)
Press "SET" once.
Press "SET" once.
Upper 3 digit
Press "UP" or "DOWN" to
change the setting.
Press "SET" once.
Enter the setting.
(Note 2)
Press "MODE" once.
Press "MODE" once.
Middle 3 digits
…… ……
…… …
The screen flickers
(Note 1)
Press "SET" once.
Press "UP" or "DOWN" to
change the setting.
Press "SET" once.
Enter the setting.
(Note 2)
Press "MODE" once.
Lower 3 digits
…… ……
…… …
Note 1. Pressing the "SET" button in upper, middle, or lower 3-digit display makes the display flicker.
2. Pressing the "SET" button in upper, middle, or lower 3-digit display fix the setting.
The display can be switched among upper, middle, and lower 3-digits by pressing the "MODE"
button.
Switching the display between upper, middle, and lower 3-digit is also possible by pressing the
"MODE" button while the display is flickering.
The changed value will be canceled when "MODE" is pressed for 2 s or more while flickering.
To shift to the next parameter number, press the "UP" or "DOWN" button.
To change the screen to the other, press "UP" or "DOWN" to change the screen to other parameter
number display screen and press "MODE".