Mitsubishi Electric MR-J4, Instruction Manual

Page: 696 / 794

18. MR-J4-03A6 SERVO AMPLIFIER
18 - 55
(2) One-touch tuning execution
POINT
For equipment in which overshoot during one-touch tuning is in the permissible
level of the in-position range, changing the value of [Pr. PA25 One-touch tuning
overshoot permissible level] will shorten the settling time and improve the
response.
After the response mode is selected in (1), pushing the "SET" button will start one-touch tuning.
Completing the one-touch tuning will start writing the auto-tuned parameters to the servo
amplifier.
The one-touch tuning progress is displayed with 0% to 100%.
The decimal point moves left to right in rotation during the tuning.
To switch the display to the status display during the tuning, push the "MODE" button.
One-touch tuning in
progress
Complete
(3) Stop of one-touch tuning
The stop symbol and error code "C 00" (cancel during tuning) will be displayed by turns
with 2 s interval.
2 s
interval
Error code
The one-touch tuning mode can be stopped by pushing the "SET" button regardless of
displayed item.
Stop symbol
Initial screen
Pushing the "SET" button will switch to the initial screen.