Mitsubishi Electric MR-J4, Instruction Manual

Page: 705 / 794

18. MR-J4-03A6 SERVO AMPLIFIER
18 - 64
(2) Operation example
(a) Parameters of 3 or less decimal digits.
The following example gives the operation procedure to change [Pr. PA Reverse rotation torque
limit].
Press "MODE" to switch to the basic setting parameter screen.
Parameter number selection
Press "UP" or "DOWN" to select parameter number.
Press "SET" to display the item to set to the selected parameter number.
Parameter contents display
Press "UP" or "DOWN" to shift to the setting display of the next parameter
number.
Press the "MODE" button to shift to the next display.
Press the "SET" button once to display the setting.
Press the "SET" button once when the setting is displayed. The setting
flickers and is possible to be changed.
Changing the parameter contents
Press "UP" or "DOWN" to change the value and press "SET" to fix the
setting. The setting will be displayed as it is after the setting is fixed.
To cancel the setting data, press "MODE" for 2 s while the display is
flickering. The setting before the change will be displayed.
Press and hold "UP" or "DOWN" to change the data continuously. In that
case, only the highest digit changes.
Example of pressing and holding the "UP" button
The first digit
increases from 0 to 9.
The first digit does
not change from 0.
The second digit
increases from 0 to 9.
The first and second
digits do not change
from 0. The third
digit increases from 0
to 9.
Example of pressing and holding the "DOWN" button
The first digit
decreases from 9 to 0.
The first digit does
not change from 0.
The second digit
decreases from 9 to 0.
The first and second
digits do not change
from 0. The third digit
decreases from 9 to
0.