Mitsubishi Electric MR-J4, Instruction Manual

Page: 540 / 794

14. COMMUNICATION FUNCTION (MITSUBISHI GENERAL-PURPOSE AC SERVO PROTOCOL)
14 - 11
Command Data No. Description Status display
Frame
length
[0] [1] [8] [0] Status display data value and
processing information Cumulative feedback pulses
Motor-side cumu. feedback pulses (after gear) 12
[8] [1] Servo motor speed
Servo motor speed
[8] [2] Droop pulses
Motor-side droop pulses
[8] [3] Cumulative command pulses
[8] [4] Command pulse frequency
[8] [5] Analog speed command voltage
Analog speed limit voltage
[8] [6] Analog torque limit voltage
Analog torque command voltage
[8] [7] Regenerative load ratio
[8] [8] Effective load ratio
[8] [9] Peak load ratio
[8] [A] Instantaneous torque
Instantaneous thrust
[8] [B] Position within one-revolution
Motor encoder position within one-revolution
Virtual position within one-revolution
[8] [C] ABS counter
Motor encoder ABS counter
Virtual ABS counter
[8] [D] Load to motor inertia ratio
Load to motor mass ratio
[8] [E] Bus voltage
[8] [F] (Note) Load-side cumulative feedback pulses
[9] [0] (Note) Load-side droop pulses
[9] [1] (Note) Load-side encoder information 1
Z-phase counter
[9] [2] (Note) Load-side encoder information 2
[9] [6] (Note) Temperature of motor thermistor
[9] [7] (Note) Motor-side cumu. feedback pulses (before gear)
[9] [8] (Note) Electrical angle
[9] [E] (Note) Motor-side/load-side position deviation
[9] [F] (Note) Motor-side/load-side speed deviation
[A] [0] Encoder inside temperature
[A] [1] Settling time
[A] [2] Oscillation detection frequency
[A] [3] Number of tough operations
[A] [8] Unit power consumption
[A] [9] Unit total power consumption
Note. This is not available with the MR-J4-03A6 servo amplifier.