Maxsine EP3 AC Series, User Manual

Page: 61 / 246

4.2 Position control mode
51
4.2 Position control mode
The position control applies in systems that need to locate precisely, such as numerical
control machine tool, textile machinery and so on. The position command is a pulse serial coming
from the input terminals PULS, PULS-, SIGN and SIGN- .
4.2.1 Simple example for position control mode
This is a simple example of positioning control. The wiring diagram is as below.
Parameter setting of the example
：
parameter Name Setting
value
Default
value
Parameter explanation
P004 Control mode 0 0 Set position control
P097 Neglect
inhibition of
servo driver
0 3 Use CCW inhibition (CCWL) and CW
inhibition (CWL). If neglect,did not
connect CCWL
、
CWL
P100 Digital input
DI1 function
1 1 Set DI1 for servo enable (SON)
P130 Digital output
DO1 function
2 2 Set DO1 for servo is ready(RDY)