Maxsine EP3 AC Series, User Manual

Page: 155 / 246

5.4 Parameter description in detail
145
 The meanings of this parameter:
0: adopting internal brake resistor.
1: adopting external brake resistor.
P085 The value of external brake resistor
Range
Default
value
Unit
Usag
e
1 ～ 750 50 Ω ALL
 Set this parameter according to the value of actual external brake resistor.
 This parameter is out of valid when internal brake resistor (P084=0) is adopted.
P086
The power of external brake
resistor
Range
Default
value
Unit
Usag
e
1
～
10000 60 W ALL
 Set this parameter according to the power of actual external brake resistor

This parameter is out of valid when internal brake resistor (P084=0) is adopted.
P089 The resolution of resolver
Range
Default
value
Unit
Usag
e
0
～
3 0 ALL
 The meanings of this parameter:
0: set the encoder resolution to 16 bits
1: set the encoder resolution to 14 bits
2: set the encoder resolution to 12 bits
3: set the encoder resolution to 10 bits
P090
Absolute position encoder type
(absolute type only)
Range
Default
value
Unit
Usag
e
0 ～ 1 0 ALL
 The meanings of this parameter:
0: single-ring absolute encoder
1: multi-turn absolute encoder
 The encoder can not reserve multi-turn information, when encoder has no external battery.
Please set this parameter as 0.
P093 Fan alarm on
Range
Default
value
Unit
Usag
e
0
～
1 1 ALL
 The meanings of this parameter:
0: Shield the fan fault alarm (except for special reasons, shield it is not suggested.)
1: allowing fan fault alarm
P094
turn on the fan and start the
temperature point Range
Default
value
Unit
Usag
e
25 ～ 125 50 ℃ ALL
 When the module temperature is higher than this temperature, drive cooling fan begins to