Maxsine EP3 AC Series, User Manual

Page: 17 / 246

1.5 Servo motor installation
7
1.5 Servo motor installation
1.5.1 The environmental conditions for installation
 Ambient temperature: 0 to 40
℃
; Ambient humidity: less than 80 %( no dew).
 Storage temperature: -40 to 50 ℃ ; Storage humidity: less than 93 %( no dew).
 Vibration: less than 0.5G.
 Install the servomotor in well-ventilated place with less moisture and a few dusts.
 Install the servomotor in a place without corrosive liquid, flammable gas, oil vapor, cutting
cooling liquid, cutting chips, iron powder and so on.
 Install the servomotor in a place without water vapor and direct sunlight.
1.5.2 The method of installation
 For horizontal installation: In order to prevent water, oil, etc. from entering inside of the
servomotor, please put the cable connector downward.
 For vertical installation: if the shaft of the servo motor is in upward direction with a speed
reducer, some prevention measure shall be taken against entering inside of the servomotor by
oil come from the speed reducer.
 Motor shaft extension should be long enough, or may cause vibration while motor is in
running
 In case of installation or removing the servomotor, please do not hit the servomotor with a
hammer, otherwise the shaft and the encoder can be damaged.