Maxsine EP3 AC Series, User Manual

Page: 168 / 246

Chapter 5 Parameters
158
P173 Encoder outputs B pulse phase
Range
Default
value
Unit
Usag
e
0 ～ 1 0 ALL
 The meaning of this parameter are
0: in-phase
1: anti-phase
 This parameter can adjust the phase relation between B phase signal and A phase signal.
That is, when motor CCW, A phase lags B phase 90 degree (P173=0) or A phase advances B
phase 90 degree (P173=1); when motor CW, A phase advances B phase 90 degree (P173=0)
or A phase lags B phase 90 degree (P173=1).
P174 Encoder outputs Z pulse phase
Range
Default
value
Unit
Usag
e
0
～
1 0 ALL
 The meaning of this parameter are
0: in-phase
1: anti-phase
P175 Encoder outputs Z pulse width
Range
Default
value
Unit
Usag
e
0 ～ 15 0 ALL
 The meaning of this parameter are
0: Pass-through, which is the original width of encoder Z signal.
1~15: the width is double width of parameter value multiplying output signal A (or B)
 Broaden Z pulse. When the upper device can not catch narrow Z pulse, it can be widened.
But you had better use Z pulse front edge.
P178 Trigger mode of homing
Range
Default
value
Unit
Usag
e
0
～
3 0 ALL
 The meanings of this parameter are:
0
： The homing function is closed.
1
：
Level triggering by the input GOH of DI
2
：
Rising edge triggering by the input GOH of DI