Maxsine EP3 AC Series, User Manual

Page: 176 / 246

Chapter 5 Parameters
166
implies not to use this bit; E implies an even bit; O implies an odd bit; Figure 1 implies the
ending bit is one.
P305 Motion mode enabled
Range
Default
value
Unit
Usag
e
0
～
1 0 M

This parameter is used for enable motion mode.
The meaning of this parameter:
0: common mode
1: enable motion mode
P309 The default target speed
Range
Default
value
Unit
Usag
e
0
～
6000 100 rpm M

This parameter is used in motion mode. The current path is position command. But when
the target speed is zero, it will go to the setting position automatically with the speed set by
this parameter.
P310 Target speed 1
Range
Default
value
Unit
Usag
e
0
～
5000 0 rpm M
 This parameter is valid under motion mode.
 It is the target speed of path under motion mode.
P311 Target speed 2
Range
Default
value
Unit
Usag
e
0
～
5000 0 rpm M
 Target speed 2, refers to the explanation of parameter P310.
P312 Target speed 3
Range
Default
value
Unit
Usag
e
0 ～ 5000 0 rpm M
 Target speed 3, refers to the explanation of parameter P310.
P313 Target speed 4
Range
Default
value
Unit
Usag
e
0 ～ 5000 0 rpm M
 Target speed 4, refers to the explanation of parameter P310.
P314 Target speed 5
Range
Default
value
Unit
Usag
e
0
～
5000 0 rpm M
 Target speed 5, refers to the explanation of parameter P310.