Maxsine EP3 AC Series, User Manual

Page: 60 / 246

Chapter 4 Running
50
4.1.3 Trial running in speed adjustment mode with keyboard
1. Turn on power supply
Turn on the control power supply (while the main power supply temporarily turned off).
The front panel display is lit. If any error appears, please inspect the wirings. Then turn on the
main power supply, the POWER indicating LED is lit.
2. Parameter setting
Set parameters according to the following table:
Parameter Name Setting
value
Default
value
Parameter explanation
P004 Control mode 1 0 Set speed control
P025 Source of speed
command
4 0 Set BUTTON source
P097 Neglect
inhibition of
servo driver
3 3
Neglect CCW inhibition (CCWL) and
CW inhibition (CWL).
P098 Forced enable 1or 0 0 Set ‘1’for forced enable;
Set ‘0’for external enable.
P100 Digital input
DI1 function
1 1 Set DI1 for servo enable (SON)
3. Operation
Confirming that there is no alarm and unusual situation, turn on the servo enable (SON), the
RUN indicating LED lit and the servomotor is active at zero speed.
Choose the adjustable speed "
A-Sr
" in the auxiliary function. Pressing the
5
button enters
the adjustable running mode. The numerical value is the speed command provided by pressing '8'
button (for increasing) or '2' button (for decreasing) and the unit is 0.1r/min. Following the speed
command, the servomotor is in rotation. The rotation direction is dependent on the sign of digits.
The positive number indicates positive direction (CCW) and the negative number indicates
reverse direction (CW).