Maxsine EP3 AC Series, User Manual

Page: 149 / 246

5.4 Parameter description in detail
139
P054
Zero offset compensation of analog
torque command Range
Default
value
Unit
Usag
e
-1500.0 ～ 1500.0 0.0 mv T
 This is the zero-bias compensation for analog torque input. The actual torque command is
that the analog torque input minus this parameter value.

By using the analog zero-bias auto-setting function this parameter is set automatically.
Refer to 3.6.2 section.
P055
Direction of analog torque
command Range
Default
value
Unit
Usag
e
0 ～ 1 0 T
 The meanings of this parameter are:
P055 Positive polarity (positive
voltage) analog input
Negative polarity (negative
voltage) analog input
0 CCW torque command CW torque command
1 CW torque command CCW torque command