Maxsine EP3 AC Series, User Manual

Page: 157 / 246

5.4 Parameter description in detail
147
2 Neglect Use
3 Neglect Neglect
Use: When input signal is ON, the servomotor can move to this direction; When OFF the
servomotor cannot move to this direction.
Neglect: The servomotor can move to this direction, and the prohibition signal does not have the
function, therefore can disconnect this signal.
P098 Forced enable
Range
Default
value
Unit
Usag
e
0~1 0 ALL
 The meanings of this parameter are:
0
： The enable signal SON comes from inputs by DI;
1
：
The enable signal comes from internal software.
5.4.2 Parameters of section 1
P100 Function of digital input DI1
Range
Default
value
Unit
Usag
e
-30
～
30 1 ALL
 The function plan of digital input DI1: the absolute value of the parameter expresses
functions; the symbolic expresses the logic. Refer to the 5.5 sections for the functions.
 The symbolic expresses the input logic. Positive number expresses positive logic and the
negative number express the negative logic. ON is effective, OFF is invalid:
Parameter DI input signal DI Result
Positive
number
Turn off OFF
Turn on ON
Negative
number
Turn off ON
Turn on OFF
 If set the same function for many input channel, the function results in logical 'or' relations.
For example P100 and P101 are set by 1 (the SON function), then DI1 and/or DI2 is ON,
the SON is effective.
 The input function which is not selected by parameter P100~P104, namely the undefined
function, results in OFF (invalid).But has the exceptional case, the parameter P120~P124
can set to force input function ON (effectively), no matter this function has planned or not.
P101 Function of digital input DI2
Range
Default
value
Unit
Usag
e
-30
～
30 2 ALL

The function plan of digital input DI2. Refer to the explanation of parameter P100.