Maxsine EP3 AC Series, User Manual

Page: 55 / 246

3.7 Resume the parameter default values
45
3.7 Resume the parameter default values
In case of the following situation, please use the function of resuming the default parameter
(manufacture parameter):
 The parameter is adjusted chaotically, the system is unable the normal work.
 The servomotor is replaced by a different newly model.
 For any other reason, the servo driver code (parameter P001) does not match with the
servomotor code (parameter P002)
The procedures for resuming the default parameter values are as the followings:
1.
Inspection servomotor code (parameter P002) whether it is correct or not. If it is correct,
carrry out the strep 4. If it is not correct, carry out the following step.
2. Modify the password (parameter P000) by 360.
3. Modify the servomotor code (parameter P002) with newly servomotor code, referring to
chapter 8.4 servomotor adaptive table.
4. Enter the parameter management, carries out one of following operations:
(1) Resume a part of the parameter default value
For resuming default parameters related to the servo driver and the servomotor and
maintaining the other user parameters, carry out the parameter write operation in the parameter
management. This operation is active only in that the password was 360 and the servomotor code
was modified. In other situations, it only has the parameter write function.
(2) Resume all of the parameter default value
Carry out to resume the default value in the parameter management, all the parameters
including the parameter modified by the user become the default value.