Maxsine EP3 AC Series, User Manual

Page: 171 / 246

5.4 Parameter description in detail
161
P189
Command executive mode after
homing Range
Default
value
Unit
Usag
e
0 ～ 1 0 ALL
 The meanings of this parameter are:
0
：
After the homing completed, waiting for the HOME signal becomes OFF and then carries
out the command again.
1 ： After the homing completed carries out the command immediately.
5.4.3 Parameters of section 2
P200 Frequency of first notch filter
Range
Default
value
Unit
Usag
e
50 ～ 1500 1500 Hz ALL
 Notch filter is the filter for eliminating the specific frequency resonance caused by
machinery.
 If the parameter P202 sets zero, then closes the notch filter.
P201 Quality factor of first notch filter
Range
Default
value
Unit
Usag
e
1 ～ 100 7 ALL
 The quality factor Q indicates the shape of notch filter. The bigger the quality factor Q, the
more incisive of the north shape and the narrower of bandwidth (-3dB) obtain.
h North Widt
frequency North
Q factor Quality

P202 Depth of first notch filter
Range
Default
value
Unit
Usag
e
0
～
100 0 % ALL