MAC215986
68
Revision A
15. Raise the header fully.
16. Shut down the engine, and remove the key from the ignition.
17. Engage the header
’
s safety props. For instructions, refer to the combine operator
’
s manual.
1004592
A
B
Figure 3.76: Float Module Underside
18. Loosen nut and bolt (A), and reposition hook (B) as shown
to engage float module arm. Tighten bolt and nut (A).
1033979
A
B
C
D
Figure 3.77: Trim Springs
–
Left side
19. On the back of the float module frame, remove bolts (A),
and spring tensioners (C).
20. Hook trim springs (B) that are hang on balance channel (D)
to spring tensioners (C).
21. Reinstall the springs tensioners onto the float module.
Tighten bolts (A) all the way.
22. Repeat on the opposite side.
WARNING
Wear heavy gloves when working around or handling knives.
