MAC215986
56
Revision A
1024737
A
B
Figure 3.46: Float Lock Handle
19. Disengage the float locks by pulling each float lock
handle (A) away from the float module and setting it in
unlocked position (B).
NOTE:
The illustration at the right shows the right side of the
header. The float lock on the left side of the header is
opposite.
Detaching Header from New Holland CR/CX Combine
The header will need to be physically disconnected from the combine, and the hydraulic and electrical connections
removed.
DANGER
To prevent injury or death from the unexpected start-up of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.