MAC215986
111
Revision A
1034016
A
Figure 3.124: Drilling Locations
7.
Drill two 11 mm (7/16 in.) holes at the marked locations (A)
on the existing flighting.
8.
Reinstall the existing bolt-on flighting.
IMPORTANT:
Ensure the carriage bolt heads are on the inside of the
auger to prevent damage to the internal components.
1034012
A
B
C
Figure 3.125: Left Side of Auger
9.
Place new flighting (A) into position on the auger, outboard
of existing flighting (B).
10. Secure with two M10 x 20 mm button head bolts and
center lock nuts (C).
IMPORTANT:
Ensure the bolt heads are on the inboard side (crop side)
and the nuts are on the outboard side of the flighting.
1017333
A
Figure 3.126: Flighting Stretched Axially
11. Stretch flighting (A) to fit the auger tube as shown. Use the
slotted holes on the flighting to get the best fit around the
auger tube.
